Before anyone who wants to create his own brewed beer can start doing it, he must own the right microbrewery equipment. If now is your very first time to do it, you must do it the simple way. The first item that you need to have is a brewpot. Ideally, your pot should be able to hold 3 gallons of liquid at the minimum.

The next microbrewery equipment that you must have is a fermenter, which must hold at least six gallons for every five gallon batch. This is the proper measurement that will allow space for the formation of foam during the fermentation process.

During the fermentation, you would need important microbrew equipment, which is a food plastic bucket.  You will also have to get an airlock to be used for the fermenter; this will permit carbon dioxide to escape and at the same time keep out the air.

In order to properly transfer the beer from the fermenter, which means not allowing air to get mixed into the beer, you have to use a special siphon hose.

A bottling bucket is also an important microbrewery equipment that will facilitate the process. Such buckets are quite the same as the fermenter, albeit the former have spigots underneath, this will permit bottles to be filled up directly. Buckets actually make the bottling process a more orderly and less messy process.

Lastly, one important microbrew equipment is the capper. This device works in sealing the bottles. Remember as part of the brewing process, you have to get quality bottles, caps or kegs in order to properly store your microbrews.

For more interesting articles on beer lagering and microbreweries in general, do visit our Microbrewery System blog. 

Writer, Abstractor and Blogger.

Article Source:http://www.articlesbase.com/home-brewing-articles/microbrewery-equipment-what-you-need-for-your-home-brewing-hobby-821636.html

Thanks for stopping by! Please share with us your home brewing experiences, ideas and tips.

For extensive links and additional information visit: SimpleHomeBrewing.com

The Celtic tradition has always embraced mead in both ceremonial and festival use. Indeed, mead is just as Celtic as the Druids. It has been touted as the “drink of the gods” for centuries. Even among today’s pagans a good bottle of mead is often just as prized and coveted as some ritual tools or “mystic secrets.” You might even be surprised at the bartering potential of a bottle of high quality mead among some circles of heathen brethren today.

A Brief History of Mead
Mead was quite possibly one of the first fermented drinks mankind developed. Egyptian, African, Greek, Roman, Celtic and Norse cultures all have recorded history mentioning mead as a favorite and preferred drink. Mead is made from honey, and honey was the only source of sweet foodstuff available to biblical and pre-biblical man. Refined sugar was not to be introduced for several centuries.

The earliest recordings of mead are from the Egyptian culture. We know there was not a great abundance of high-sugar fruit in the Egyptian region. The only abundant source of sugar for producing alcohol came from honey, which was highly prized in the region at that time, and still is today. Other early civilizations like the Romans and Greeks also lacked high-sugar fruit and refined sugar sources to make drinkable alcohol, but honey was readily available and cultivated in these areas as well.

How did man discover the process for making alcohol?
Well, more than likely it was accidental. Honey has a tendency to accumulate water derived from moisture in the air, and once water accumulates to dilute the honey at the surface of a container the natural yeast present in the honey starts the process of making mead naturally. More than likely, early man just realized that when honey was combined with water and was left to sit it would generate what we now know as an alcoholic beverage called mead.

This was a very unpredictable cultivation at first because these cultures had no idea exactly how the process took place or what the catalyst was. Batches of honey were often simply diluted with water and left in the sun to see what happened even up until the 1800’s. Some mead was successfully brewed and other batches were more than likely spoiled by contamination from other microorganisms.

The father of modern brewing - Louis Pasteur
It was not until the mid 1800’s that the process of making drinkable alcohol from sugar, a process known as fermentation, was truly understood through the research of Louis Pasteur. Pasteur is most recognizable to Americans as the scientist credited with the development of pasteurization used to sanitize milk as well as other contributions to the field of biology. However, the rest of the world widely recognizes Pasteur for his great contributions to the field of wine making. He was credited for discovering and documenting the scientific basis for fermentation used to this day in all forms of brewing.

The process seems quite un-natural until you have an understanding of microbiology. Egyptian and Celtic cultures certainly had no knowledge of these concepts. More than likely a serious spiritual significance was probably placed on the brewing of mead. However, in today’s world we understand how the process works on a biological level.

The Ingredients:

Other than core ingredients such as honey and fruit juices there are relatively few additional ingredients. Some added ingredients are to help with fermentation and others are for flavor enhancement and balancing. Here is a basic list of the most widely used ingredients today:

Campden Tablets kill bacteria, molds and wild yeast and are essential when making wine from fresh fruit or unpasturized honey. They’re not generally required if using sterile ingredients to being with and should be avoided in these cases as they will only unnecessarily slow down fermentation. The normal dose is usually 2 crushed tablets per gallon. Be sure to cover the mixture with a cloth or towel and let vent for at least 24 hours before adding cultured yeast to the batch. Otherwise, the tablets will slow down or kill the yeast that’s deliberately introduced to the batch to kick off fermentation. Campden tablets are also often added to wine just before bottling (and not given a chance to evaporate out) to sterilize the wine and prevent fermentation in the bottle. Campden tablets have a mild effect on flavor when used in the prescribed doses.

Yeast, is the key to making wine, is a microorganism that naturally consumes sugar (along with other nutrients) and outputs waste and carbon dioxide along with other particles. Yeast occurs naturally in most fruit and in honey but this yeast often produces an undesirable or undrinkable wine and should be destroyed using campden tablets or boiling before starting fermentation. Several strains of yeast are available from local brewing shops. Some are used for beer, others for wine and others for Champaign. Each type produces a different type of flavor. Most mead is made with wine yeast or Champaign yeast if a slight carbonation effect is desired.

Yeast Nutrient contains all the essentials for yeast to thrive. Adding nutrient is not absolutely necessary but without it some fermentations would become sluggish and take much longer to complete. Nutrient should be added in the amount of 1-2 tablespoons per gallon before the yeast are added to the wine.

Yeast Energizer is essentially the same thing as Yeast Nutrient but is especially bended for fresh fruit wines.

Acid Blend is a crystallized version of most of the acids naturally occurring in fruit (tartaric, maltic and citric acid). This is often added mainly as a flavoring agent to fruit wine that is naturally low in acid such as apple wine. Refer to your wine recipe for acid blend amounts.

Tannin (grape or other) naturally occurs in some fruit such as grapes and is used primarily as a flavoring agent. Tannin increases the “astringent” quality of wine which gives it a fuller flavor or “zest”. Tannin also aids in clearing/fining the wine and in aging quality. Refer to the recipe for amounts to add.

Peptic Enzyme is added to fresh fruit wines and forces the fruit pulp to release more of the natural fruit juice and the natural fruit color. Refer to the recipe for amounts to add.

Potassium Sorbate is an additive used just before sweetening wine when bottling. The additive coats any existing yeast cells so that they cannot reproduce even if there is sugar present in the wine. Note, this does not kill any yeast cells, it simply means that the fermentation will not get any more intense than it already is. If there are still enough living yeast cells in the wine when bottling you may still have problems after the wine is bottled even if potassium sorbate is used.

Sodium metabisulfite is an extremely strong contact-sanitizer for wine making equipment that can be purchased at most home brew shops. Any equipment that comes into contact with the wine should be thoroughly rinsed in sodium metabisulfite.

Sparkloid is a brown powder substance that’s mixed with hot water and poured into a mead that has stopped fermenting in order to help clear the mead. The mixture must be thoroughly stirred and then allowed to settle for at least 24 hours. The clear mead may be siphoned off of the sediment that settles at the bottom. Fining agents must often be administered two or three times to achieve optimum mead clarity. .

Bentonite is a fining agent used the same way as Sparkloid but can be much more effective in my personal experience and ranges in the same price. If given a choice I choose bentonite over Sparkloid anytime.

Other Sources:

http://www.squidoo.com/easybeermaking
http://www.squidoo.com/honeymead

James enjoys a myriad of hobbies from computer gaming, paranormal research, web design, teaching & adult training, natural healing & herbalism to making his own wine and beer. He is an avid home brewer and has been for many years specializing in traditional honey and fruit based wines. More recently he has begun serious study into beer recipes and methods and plans on producing a series of beer videos on youtube to match his “super simple winemaking” videos that are so popular on the site.

Project websites include:

http://simplehomebrewing.com

Article Source:http://www.articlesbase.com/home-brewing-articles/how-to-make-mead-honey-wine-at-home-part-1-822645.html

Thanks for stopping by! Please share with us your home brewing experiences, ideas and tips.

The Equipment:
Primary Fermentation Container: The best container to use for primary fermentation (discussed later) is a food grade bucket with lid or barrel. The key to selecting an appropriate primary fermentation container is the container having a large surface area exposed to the wine (no small openings) and having it at least a gallon larger than the batch you want to produce. If you want to brew a five gallon batch you probably want to select a six gallon container and leave a few inches of air space at the top for the foaming that may occur during fermentation.

Secondary Fermentation Container (Carboy): A secondary container should have a very slender opening and should be able to be easily filled almost to the top. As little surface area of the wine as possible should be exposed to the air. You should also be able to attach an air lock and rubber bung to the secondary fermenter making it air tight except for the air lock. The most widely used secondary fermenter is a glass carboy or plastic ozarka bottle.

Siphoning / Racking Equipment: At the very least you will need some type of rubber or vinyl hose to move wine from one container to another. Many home hobbists also use a “racking cane” which is essentially a J-shaped hard plastic or glass tube with or without a small cap to keep the cane above the sediment in the containers. When working with five gallon batches of wine at least 5 feet of hose is required.

Hydrometer: A hydrometer measures the specific gravity (density) of the wine. This allows you to judge the sugar content of the wine. A minimum starting sugar content of wine is usually 1.74 to 1.90. When the hydrometer registers 0 all sugar in the wine has been converted to alcohol. Hydrometers are also effected by temperature variations in the wine. Refer to the documentation that comes with your hydrometer for exact specifications and conversion tables.

Levered or Floor Corker: If you are planning on bottling and corking your wine it’s well worth the $20-30 for a levered or floor corker. Some models of corkers do not use levers and require you to apply a large amount of direct force to the cork to force it into the bottle. These types of corkers can be extremely difficult to use. If you are planning on corking your wine then you’ll want to invest in a relatively inexpensive corker that will allow you to quickly and easily seal bottles. Remember, a five gallon batch of wine can make as many as 25 standard sized (750ml) bottles of wine so you probably won’t be corking just one or two bottles at a time. If possible, try out the corker before buying it to make sure it’s comfortable for you to use.

Other useful tools: A plethora of other tools can be very useful when making wine but are not necessarily “specialist equipment”. They are not absolutely essential but they can make the process MUCH easier. These include bottle brushes, rinsers, drainers, fillers, long handled stirring spoons, thermometers, funnels, hose clamps, pulp bags, etc.

Other Sources:

http://www.SimpleHomeBrewing.com
http://www.squidoo.com/easybeermaking
http://www.squidoo.com/honeymead

James enjoys a myriad of hobbies from computer gaming, paranormal research, web design, teaching & adult training, natural healing & herbalism to making his own wine and beer. He is an avid home brewer and has been for many years specializing in traditional honey and fruit based wines. More recently he has begun serious study into beer recipes and methods and plans on producing a series of beer videos on youtube to match his “super simple winemaking” videos that are so popular on the site.

Project websites include:

http://simplehomebrewing.com

Article Source:http://www.articlesbase.com/home-brewing-articles/how-to-make-mead-honey-wine-at-home-part-2-822648.html

Thanks for stopping by! Please share with us your home brewing experiences, ideas and tips.

All your dreams are starting to come true and you are putting together all your wedding plans. There are a vast number of planning steps and procedures that you need to partake in and finding a good caterer should be at the forefront. In Miami, Florida there are a number of caterers that will offer their service and try to guarantee the best catering in the city. There are a number of factors that you should take into consideration before finalizing your decision on which Miami caterer to use.

Choosing the food at your wedding is often the biggest and most important decision you can make. If everything else goes according to plan, but the guests do not enjoy the food, the whole day can be put in jeopardy. While you almost certaintly realized that you needed to find a caterer the moment you starting planning, you have to be sure that you do not put it off until the last minute. The earlier you book a caterer, especially in such a popular area such as Miami, the better off you will be.

Before even beginning to shop for a caterer there are some factors you need to consider. It is important to decide whether you will be having an open reception or a set guest list. Negotiate a budget in relation to your reception and plan your guest list accordingly. You should have a pretty good idea of how many people you wish to attend your reception before looking to employ a catering service. Once you have come up with an estimated number and a price range, you can enquire into the services offered by caterers.

While you are surely already aware of the benefits inherent in investing in a professional caterer for your wedding, it can be quite trying to actually find the best one available. One of the first and best ways to being searching is to look for recommendations. These can either come from people you know and friends or from professional wedding planners. The caterer that you hire has a crucial impact on your wedding day on the whole, so it is important to take recommendations into careful consideration. If a caterer has ensured that someone else’s special day was perfect, there is a far greater chance that they will do the same for you.

Once you have narrowed down your search you should take the final step and start interviewing the Miami caterers that you are interested in. The interview process can be a great way to weed out the companies with less experience and find the ones that you feel most comfortable with. In the end, it is your comfort that is most important. By discussing your day and menu with a caterer one on one, you will get a much better idea of how reliable they are and which services they offer.

There are a number of caterers in Miami and the surrounding area. Some are experienced and reliable and others are not. Take some of the previously mentioned ideas into consideration and you will improve your chances of hiring the perfect service for your perfect day.

For more information on Wedding Catering Miami and Catering Miami, please visit our wedding events website.

Article Source:http://www.articlesbase.com/home-brewing-articles/wedding-catering-miami-factors-to-consider-840553.html

Thanks for stopping by! Please share with us your home brewing experiences, ideas and tips.

Imagine the breeze in your hair, the sounds of the ocean in the background and the sun setting perfectly behind you and your loved ones. This is the exact moment that you create while holding your loved one’s hand and repeating the simple words, “I Do”, or it can be the best way to hold any celebrate for any occasion with your family and friends. Delray Beach in South Florida is the ideal location for any special event where you are looking for a unique yet incredible experience. From weddings, to birthday parties to family reunions, Delray Beach offers unrivaled benefits than a number of other areas.

The location of Delray Beach makes it one of the greatest locations to hold an event in all of Southern Florida. While the beach itself is the main draw, there are a number of nearby attractions that will keep yourself and your guests entertained and enthused. Once your party is over, or before the party begins, you and your guests can visit the main strip. The strip is known as Atlantic Avenue and has a plethora of shops, boutiques and markets that offer all sorts of souvenirs and goodies.

On top of shopping, there are also other attractions that are quite entertaining and affordable. One of the most popular is the nearby Wakodahatchee wetlands. Here you can walk around and see all types of wildlife including rare birds and even alligators. For guests that have never experienced animals of this kind it can be quite a thrilling experience that will add greatly to the memory of your special occasion.

If you are looking to make your special occasion perfect, not only is location important but so are the activities and food that you provide. There is no doubt that any major event will take an incredible amount of planning on your part and there is often not enough time to do everything by yourself. This is precisely why hiring a professional and reliable caterer can be a staggering advantage for any occasion. When it comes to Delray Beach, the catering services offered in the area are another reason why the location is so ideal.

Not only does Delray Beach provide the perfect backdrop for your event, but you can find excellent services in the surrounding area that will help the special day go off without a hitch. While the natural beauty is your main draw to the area, an event without food and great service will not be a successful one. Take advantage of Delray Beach catering and you can make an already special day completely unforgettable. You provide the people and the fun and let an experienced, reliable caterer take care of the food.

At the end of the event, you want your guests to leave with unforgettable memories. Now you can focus on doing so without having to worry about the food. The pros will take care of everything for you.

For more information on Catering Boca Raton and Delray Beach Catering, please visit our wedding events website.

Article Source:http://www.articlesbase.com/home-brewing-articles/delray-beach-catering-the-ideal-location-for-special-occasions-840555.html

Thanks for stopping by! Please share with us your home brewing experiences, ideas and tips.

How Mead is Made - Fermentation & beyond

Yeast does the work
The whole feat is accomplished using a microorganism known as yeast. These microscopic life forms are classified as a higher order of fungus with the ability to consume sugar and expel drinkable alcohol and carbon dioxide as waste. If yeast is introduced to a liquid with a high sugar content and held at the optimum temperature (about 70-75 degrees F) it will quickly consume the majority of sugar in the mixture and replace it with its natural byproducts, alcohol and CO2. The more sugar present in a mixture the more alcohol generally produced in the end product. As the percentage of alcohol in the mixture (known as “must” in the wine industry) raises the process of fermentation slowly halts. Alcohol is toxic to yeast in high volumes. Some residual sugars may remain in the mixture after fermentation is almost complete but if more is added the process of fermentation will continue to further raise the alcohol content to somewhere in the neighborhood of 24-25% (50 proof). At this point, the alcohol content of the mixture is usually too high and the yeast begin to stop fermentation and die.

Quick step-by-step guide:

1. If using a yeast culture (recommended especially for fresh fruit batches), buy a bottle of bottled apple juice and pour out about ½ of the juice. Mix in the dry yeast and cap with an air lock and rubber bung. Do this at least a week before you plan on starting the wine batch. Let sit in a cool dark place.

2. Mix all ingredients in recipe except for yeast nutrient/energizer & yeast into the primary fermenter.

3. If fresh fruit or un-pasteurized honey is used crush and mix 2 campden tablets per gallon into the wine, cover with a towel and wait at least 24 hours.

4. Whisk wine (optional) and add yeast nutrient and dry or cultured yeast.

5. Stir thoroughly daily for at least the first week. (remember to sterilize your spoon before stirring )

6. When air lock bubbling slows to 1 every 2-3 minutes test with hydrometer. If SG is below 1.34 then rack switch to secondary fermenter.

7. Freeze and thaw (see instructions below) if desired.

8. Clear with Bentonite or Sparkloid 3-4 times

9. Stabilize with Potassium Sorbate & Campden tablets

10. Sweeten to taste

11. Bottle in corked bottles, 2 liter or gallon containers.

12. Age as desired (aging can also be done in larger secondary fermentation containers.

13. Sample liberally sample

The basics
The honey is mixed with all the necessary ingredients in a container, usually a food-grade plastic bucket. The mixture is sanitized and additional nutrients beneficial to the rapid growth of yeast are added to the basic wine mixture, known as “must”. A yeast culture is added to the must and fermentation begins. An air-lock is usually attached to the container so that the carbon dioxide produced during fermentation can escape the container but air from the outside cannot contaminate the fermenting mixture. An air-lock, or fermentation lock, is usually an S-shaped tube with a water trap in the bottom. As pressure from the fermentation container builds it bubbles through the water trap and escapes into the open air on the outside of the container. As long as the pressure in the container remains greater than the outside atmospheric pressure then no air is allowed to enter through the fermentation lock. Maintaining a higher pressure inside the fermentation tank is not difficult as the natural bi product of fermentation is CO2. A sterile cotton plug in the top of the container can also be used for this purpose but this doesn’t allow for the brewer to see when the mixture stops bubbling which is used as an indicator for fermentation levels.

Primary & Secondary Fermentation:
Traditionally, there are two stages to fermentation, primary and secondary fermentation. The first stage is usually done in a bucket or a barrel with at least a few inches of air space above the fermenting mixture. This air is essential as this is the “aerobic” stage of fermentation. If the gap were filled completely with wine the container would likely explode or at the very least spew out the vent hole or air lock at the top of the primary fermenter. 90% of the alcohol is made in the first stage of fermentation. In most batches primary fermentation is complete within the first 30-40 days. The official end of fermentation occurs when the specific gravity of the wine reaches 1.34 on a hydrometer given that the beginning reading was at least 1.70 before fermentation began. The air lock should bubble no more than 1 time every 2-3 minutes at the end of primary fermentation. At the height of the primary fermentation the air lock may bubble as many as 50-60 times per minute.

The 2nd stage of fermentation usually involves siphoning the wine into a glass container and leaving a very small gap between the wine and the top of the container. This stage of fermentation is known as “anaerobic” since exposing the wine to air at this stage will be detrimental to the fermentation process and may significantly alter the taste of the wine. Once secondary fermentation has begun great care should be taken to minimize the exposure of the wine to air. This stage of fermentation is complete when there is absolutely no pressure change (no bubbles in the air lock) and the specific gravity is 0. Adding additional sugar to the wine at this point may trigger a growth in yeast cells again and eventually raise the alcohol content if fermentation is allowed to continue. Secondary fermentation may take as long as a year with air lock activity reducing to less than 1 bubble per week in some cases. Specific gravity checks with a hydrometer is the only sure way to guarantee fermentation has completely stopped.

Warning: attempting to bottle wine or mead before you are absolutely sure fermentation is 100% complete may result in bottle explosions or ruined / undrinkable wine.

Other Sources:

http://www.SimpleHomeBrewing.com
http://www.squidoo.com/easybeermaking
http://www.squidoo.com/honeymead

James enjoys a myriad of hobbies from computer gaming, paranormal research, web design, teaching & adult training, natural healing & herbalism to making his own wine and beer. He is an avid home brewer and has been for many years specializing in traditional honey and fruit based wines. More recently he has begun serious study into beer recipes and methods and plans on producing a series of beer videos on youtube to match his “super simple winemaking” videos that are so popular on the site.

Project websites include:

http://simplehomebrewing.com

Article Source:http://www.articlesbase.com/home-brewing-articles/how-to-make-mead-honey-wine-at-home-part-3-822654.html

Thanks for stopping by! Please share with us your home brewing experiences, ideas and tips.

Freezing to Stop Secondary Fermentation:
Since the vast majority of the alcohol is produced in the first 30-40 days and most wine is drinkable at that point the main purpose of secondary formation is to wait for the yeast to consume all available sugar and die so the product can be safely bottled. One method of speeding the process up is to freeze the wine. This ruptures the yeast cells and stops fermentation. However, alcohol that is in the batch to be frozen may gather together in the freezing process and create an unfrozen pocket of liquid in which a few of the yeast cells may be able to survive. It only takes one or two yeast cells coming into contact with sugar to kick off fermentation again once the mixture is thawed.

Therefore, freezing the mead in small batches (2 liters to a gallon size at a time) at very cold temperatures (deep freeze) for several days in a row is recommended. Remember to leave a few inches in the freezing container for the water in the mead to expand as it’s frozen. Once the mixture has been frozen for several days, remove and let thaw with a tight lid on the bottle to keep the wine from being infected with air born bacteria. Let the wine thaw completely and rack off the sediment (discussed below) and attach and air lock. Wait a few days and watch the pressure in the bottle by monitoring the water level in the air lock.

If pressure begins to build up in the container again it’s a sign that fermentation has begun again and the batch needs to be frozen again. This may take several freezing rounds for some wines but is much faster than waiting a year for the fermentation to end naturally and has absolutely no effect on the flavor. In fact, freezing improves the flavor by helping to remove solid particles suspended in the mead from fermentation. Once the frozen mixture is thawed, the solid particles float to the bottom of the container where you can rack off sediment. Sediment suspended in mead is the #1 cause of bad / off wine flavor.

Beyond Fermentation
After fermentation the mixture is sanitized to kill all microbes, including yeast, and sweetened to taste or left as-is for an un-sweet or “dry” flavor. The wine is usually stored in a wooden cask/barrel to age. Aging wine is a fine art in itself apart from mixing the ingredients in the original recipe and controlling the fermentation process. It can also be done quite successfully by the hobbyist in a wine aging container known as a carboy, which is essentially a large water bottle that varies in capacity from one to ten gallons, or even larger. The wine will usually be filtered mechanically or siphoned from one container to another to remove any sediment that’s collected as a result of the fermentation process. Bottling and further aging is usually the last step in the process.

Taking out the sediment - Racking
The mixture is allowed to ferment until either fermentation has ended or drastically slowed (the air-lock stops bubbling) and is then siphoned into a carboy (another container) and allowed to age and sit so the sediment created during the fermentation process can collect at the bottom of the container. The top wine is then siphoned into another container leaving the sediment behind. This process continues until no sediment collects on the bottom of the carboy. This siphoning process is known as “racking.”

There is some debate as to whether leaving the sediment in the fermenting batch during primary and secondary fermentation will affect taste. Many brewers leave all sediment in the bottom of the batch of mead throughout the entire process with no ill effects on taste. However, the process of racking often stirs up the sediment to a small degree. Because of this it’s recommended to rack the clear mead off the top of the sediment once the sediment level reaches ¼ to ½ inch in depth. Refer to the section below about “fining” the wine to force sediment to the bottom of the container.

Getting a clear product - Fining
Additional substances can be added to the wine at this point to capture any remaining particles suspended in the wine, forcing them to the bottom of the container for one final racking. The addition of additional substances to produce a clearer wine product is known as “clarifying” or “fining” the wine.

Two main products are popular for this among hobbyist wine makers today. The most effective is a clay known as Bentonite. The clay comes in granule form and must be mixed with boiling water. The mixture is then mixed with wine (chilled wine for best results). The clay has a naturally occurring negative ionic charge which bonds with particles / sediment suspended in the wine. The clay is heaver than the particles so it drags the sediment down to the bottom of the container so that the clear wine can be racked off the top. Once the mixture has been added to the wine, stir with a large spoon until the entire mixture becomes cloudy and let sit for at least 24 hours (48 recommended). The wine may be treated with bentonite as many times as needed without harming the quality or taste of the finished wine. Two to three treatments are usually required to get crystal clear wine, especially if fresh fruit was used as an ingredient.

Bentonite is most effective when wine is cooler than 70-75 degrees and the bentonite mixture is as close to boiling as possible. The temperature variation makes a dramatic difference in the effectiveness of the treatment and may mean the difference between one treatment and three or four being required. Bentonite is relatively inexpensive so it may be more practical to repeat treatments rather than chill a large container of wine.

The other popular fining agent for wine is Sparkloid which is used in much the same fashion as bentonite but with not quite the dramatic result. If bentonite is not available at your local brewing store then feel confident is using Sparkloid but you may want to increase the wait time to 6-10 days before racking and re-treating. Other traditional fining agents include eggshells, bulls blood and egg whites.

Bottled or aged for quality
The wine or mead is then usually sanitized one final time using a sanitizing chemical available at most home brew shops and then bottled in an appropriate container. The wine can be consumed immediately or allowed to age to improve flavor. Wine bottles with corks are preferred by most serious hobbyist brewers, as the corks will allow for a very slow oxidation of the wine over time, greatly improving the quality of the flavor and aroma.

What does aging a wine do?
The process of aging a wine is a slow chemical reaction in which the wine or mead is allowed to rest and slowly oxidize in a container. Wooden containers are often used for aging because the wine will take on the flavor and aroma of the wood. The wood allows for a slight amount of oxidation of the wine which can improve flavor. Oak is especially prized in the wine industry for this purpose. New wine can have a harsh and distinctly different flavor and aroma from wine that has been well aged.

Aging in Wood
Serious home brewers can also purchase wooden barrels or casks to age their wine but this is often reserved for individuals who can make a substantial $200+ investment in their hobby. Anyone else wanting the wood flavors from aging wine can obtain wood chips from a local brewing store and age the wine in the carboy with the chips to produce a flavor similar to that of aging wine in traditional wooden barrels at a fraction of the cost.

Mead or Wine
Wine is any sugar based fermented beverage. Mead is a specific variety of wine made from honey. Mead is a type of wine but no wine may wear the label of mead unless it’s primary ingredient is honey.

Other Sources:

http://www.SimpleHomeBrewing.com
http://www.squidoo.com/easybeermaking
http://www.squidoo.com/honeymead

James enjoys a myriad of hobbies from computer gaming, paranormal research, web design, teaching & adult training, natural healing & herbalism to making his own wine and beer. He is an avid home brewer and has been for many years specializing in traditional honey and fruit based wines. More recently he has begun serious study into beer recipes and methods and plans on producing a series of beer videos on youtube to match his “super simple winemaking” videos that are so popular on the site.

Project websites include:

http://simplehomebrewing.com

Article Source:http://www.articlesbase.com/home-brewing-articles/how-to-make-mead-honey-wine-at-home-part-4-822656.html

Thanks for stopping by! Please share with us your home brewing experiences, ideas and tips.

Types of Mead
There are as many flavors of mead as there are drops of rain in a thunderstorm. Honey itself is a very unpredictable product, but even two batches of mead started from the same hive of honey can end up with different flavors and properties. However, there are some general classifications of mead that are detailed as follows:

Mead: honey wine with only honey and no additional spices
Sack Mead: sweet honey wine but the only sweetener used was honey. No additional spices.
Metheglin: honey wine that has been spiced for flavor. Examples of common spices are cinnamon, nutmeg, cloves, rosemary & thyme.
Sack Metheglin: sweet spiced honey wine
Hydromel: weak or watered mead
Sparkling Mead: mead made with the same carbonation technique as Champaign
Cycer: Mead made with apple juice
Ryzomel: Mead made with flowers

Mead, Wine, Beer & Ale making as a hobby
Various spices and fruit juice combinations are used today to make meads and wines of all variety. Many people enjoy the hobby of home brewing to make their own beers, ales, wines and meads which is perfectly legal in the US as long as it’s not done for sale and the mixtures aren’t distilled into stronger spirits. Federal law provides that individuals may produce up to 200 gallons of wine per year per person per household. Wine making kits are readily available at local home brew shops or via the internet for $50 to $100. Internet and book resources are also readily available to today’s hobbyist to explain the process step-by-step.

Many people today enjoy making their own meads, wines, beers and ales for the pure satisfaction and enjoyment of doing the job themselves. Once the basics of brewing are understood it’s very easy to make your own custom flavors or play with recipes from more traditional products like mead or grape wine. Wine can be made from just about every fruit and vegetable on the planet given proper understanding of fermentation. These beverages can often be made by the hobbyist MUCH cheaper than if the same products were bought commercially and often with the same quality as commercial brews. Custom brews make great gifts too! Home brewing has become so popular that hobby clubs have been in operation for years and often promote local competitions among fellow brewers.

Other Sources:

http://www.SimpleHomeBrewing.com
http://www.squidoo.com/easybeermaking
http://www.squidoo.com/honeymead

James enjoys a myriad of hobbies from computer gaming, paranormal research, web design, teaching & adult training, natural healing & herbalism to making his own wine and beer. He is an avid home brewer and has been for many years specializing in traditional honey and fruit based wines. More recently he has begun serious study into beer recipes and methods and plans on producing a series of beer videos on youtube to match his “super simple winemaking” videos that are so popular on the site.

Project websites include:

http://simplehomebrewing.com

Article Source:http://www.articlesbase.com/home-brewing-articles/how-to-make-mead-honey-wine-at-home-part-5-822658.html

Thanks for stopping by! Please share with us your home brewing experiences, ideas and tips.

How to brew honey mead, short and sweet.

Honey Mead
** 15 lbs of honey in 5 gallon batch makes good sweet but 20 lbs of honey is like cotton candy. I like to use the pasteurized processed clover honey from Sam’s Wholesale club or Wal-Mart. I’ve tried different honey with varying result. The honey makes a dramatic difference in the body and flavor of your mead. Pasteurized and processed honey negates the need for campden tablets as long as you’re not putting in anything else that may be contaminated with bacteria. Use good filtered water too. It really makes a difference. I use a Britta filter.

INGREDIENTS for each gallon of mead to be made:

2 1/2 to 3 lbs. (about 26 - 32 fl. oz.)unprocessed honey (dry to semi-sweet)
Water to one gallon (Specific Gravity - 1.085 - 1.105)
1 tsp. Super Ferment (or 2 tsp. regular “nutrient”)
2 tsp. acid blend (or 3/4 tsp. tartaric acid & 1 1/4 tsp. malic acid)
1 tsp grape tannin
1 campden tablet* (crushed- or substitute 1/8 tsp. sodium metabisulfite)
1-2 pkgs. wine (e.g. Premier Cuvee, Champagne, Cote des Blancs, Sherry) or mead yeast

PROCEDURE:

1. Mix all the ingredients EXCEPT the yeast and the campden tablet. Stir the must until the honey and additives are completely dissolved. Cover the pail to keep out dust and air with the large plastic sheet.

2. Crush and dissolve the campden tablet in 1 oz. of warm water. Add this to the must and stir well. Cover the pail again and tie down the plastic sheet. Let the must stand for one day, stirring several times.

*ALTERNATIVE: Heat honey with an equal volume of water to 180°F and let stand for 15 minutes to pasteurize. (DO NOT BOIL!) Cool and add remainder of water before proceeding to next step.

3. Rehydrate the dried yeast by sprinkling it into 1/2 cup lukewarm (95 - 100° F) water in a sanitized jar and cover for 20 minutes. (If using “Mead” yeast, prepare a starter 48 hours prior to using.) Add the yeast “slurry “/starter to mixture. Re-cover the primary fermenter and allow fermentation to proceed for 30-40 days or until foaming subsides.

4. Syphon the mead into a sterile glass jug. Avoid the transfer of sediment and aeration as much as possible. Be sure the mead completely fills the jug - into the neck. Attach a fermentation lock and allow the fermentation to go to completion (.995 - 1.020 S.G.).

5. One week after fermentation has ceased, syphon the mead into another sterile glass jug. Again, avoid the transfer of sediment and aeration. Crush, dissolve and add 1/2 campden tablet per gallon to the mead. Allow the mead to stand for one month in a cool dark place and repeat “racking” process. If at the end of three months, the mead is clear - bottle it. If it is not clear, repeat this step every month until it is clear and then bottle it. The mead may be sweetened to taste with additional honey, if desired, after stabilization (1/2 tsp. potassium sorbate & 1/2 campden tablet per gallon).

Note: All equipment should be well washed and sterilized with a solution of sodium metabisulphite. Fermentation temperatures should be no lower than 60 degrees F. or higher than 80 degrees F.

For an interesting variation, try adding a 6 oz. can frozen juice (e.g. orange, apple, cranberry) and cut back on the acid blend by 1 tsp.

Ratio for different meads - (parts by volume honey: parts by volume water)

DRY: 1:4 (2 1/2 lbs. honey per gallon)
SEMI-DRY: 1:3 (3 lbs. honey per gallon)
SWEET: 1:2.5 (4 lbs. honey per gallon)

EQUIPMENT REQUIRED FOR MAKING MEAD

Large Plastic pail or earthenware crock (primary fermenter)
One gallon glass jug (secondary fermenter)
Fermentation lock & drilled rubber stopper
Syphon tubing
5 ” Fifth” wine bottles and corks per gallon
Large plastic sheet

Other Sources:

http://www.SimpleHomeBrewing.com
http://www.squidoo.com/easybeermaking
http://www.squidoo.com/honeymead

James enjoys a myriad of hobbies from computer gaming, paranormal research, web design, teaching & adult training, natural healing & herbalism to making his own wine and beer. He is an avid home brewer and has been for many years specializing in traditional honey and fruit based wines. More recently he has begun serious study into beer recipes and methods and plans on producing a series of beer videos on youtube to match his “super simple winemaking” videos that are so popular on the site.

Project websites include:

http://simplehomebrewing.com

Article Source:http://www.articlesbase.com/home-brewing-articles/making-mead-honey-wine-a-simple-recipe-822660.html

Thanks for stopping by! Please share with us your home brewing experiences, ideas and tips.

The Beer Machine - An Ultimate Home Brewing Device for Beginners

Brewing Beer is a fantastic hobbie and very addictive. You can really impress your friends with great tasting home made beer. The beauty is that when you brew your own you have the opportunity to make virtually hundreds of styles of beer.

The world is facing a serious shortage of barley, a key factor in producing beer. There is continually less barley farmers every day, they have found other things to grow which sell for more which is causing the shortage. Because of the shortage of Barley, the price for beer is steadily on the rise, and there is a lot more people getting into brewing their own beverages. Now the hobbie is well practiced amongst both young and old, throughout the world.

If you want to learn how to make beer at home, and are new to home brewing, the most inexpensive and simple way to get started is with a Beer Machine. It the perfect device for beginners who want to get started brewing their own beer.

The Beer Machine Ltd. has been established for over 20 years now and ships 10 000’s of Beer Machines each year to doorsteps around the world. The Beer Machine is a self-contained, single-step brewer that makes brewing your own fresh premium naturally made beer as easy as brewing coffee.

Once purchased, you have the option to brew any style of beer imaginable for literally pennies a bottle! The fermentor produces 2 gallons of great tasting beer in as little as 7 days. Each kit is completely reusable and includes everything you need to start brewing batches of beer.

It doesn’t get much easier to drink beer than this. Except maybe some of that store bought beer - but where’s the fun in that?

Once you Tap your first batch of Beer Machine brew, it will be the first of many and the beginning of a long term relationship. To visit the official website Click Here

Online Opinionator

Article Source:http://www.articlesbase.com/home-brewing-articles/brewing-beer-for-beginners-836784.html

Thanks for stopping by! Please share with us your home brewing experiences, ideas and tips.